57 Comments

I appreciate all it has and still does cost you and Tony to learn what you have, and then again to share it with us. Thank you both.

Expand full comment

Hi Eric,

I have been waiting patiently for this video. I see the process is a lot more refined now for us electrical luddites.

After frying a few $60 flasher units plus getting very busy I got frustrated and stopped. I don't know how nor care that the unit switches without a flasher unit but am very pleased to see it.

Regardless of the other applications I see a definite and immediate use for decontaminating food prior to ingestion.

Thanks.

matt

Expand full comment
author
Apr 5Author

Thanks brother.

Expand full comment

How do you use it overall and specifically to decontaminate food and water?

Expand full comment

Eric has posted good videos on that.

Expand full comment

You guys are the best… keep thinking and creating 👏

Expand full comment
Apr 25Liked by FM8

Do all magnets face the center of the triangle with the same poles?

Expand full comment
author
Apr 25Author

All pairs are opposing

Expand full comment

Thank you Eric for your valuable advice. I made my triangle (Tony's model)

Expand full comment

This is great thankyou. I'm relatively new to all this. I'm almost there although wanted to know what strength magnets to use. Thanks again for all your help 🙏🙏🙏

Expand full comment
author
Jul 20Author

They don't need to be very powerful, I personally discourage people from using very powerful magnets, it can be to overwhelming.

Expand full comment

Thanks for the quick reply 👍 What your doing is really appreciated. 🙏

Expand full comment

Hey Eric, what do you mean when you say overwhelming, in terms of symptoms?

Expand full comment
Apr 20Liked by FM8

can you do a video on building the bigger one with the parts list

Expand full comment
author
Apr 20·edited Apr 20Author

Not necessary. All you need to do is make your fixture bigger, and have more supplies one hand. Building it bigger or smaller is basically the same process with more or less wire & magnets. The principal is the same.

Expand full comment

yeah thats if you can get all the parts down here in oz we pay $280 for the magnets alone

and about $175 for the cable . better to just make the spike here

Expand full comment

Thanks to you, I am now drinking distilled water & sharing with the fam. So much to learn...I have been trying to slow things down to decompress for a bit. <3

Working on garden & chickens (a labor of love). I think triangle experiment will be my next project. The comments are helpful to read.

I'm also tempted to squirrel away some $$ and just get it in my hands, already. :D

Expand full comment
Apr 4·edited Apr 4Liked by FM8

You are the "best". Thank you. I love the peg form that you made. Makes it so easy to get the Triangle off it. My frame made from cutting boards is painful, even if I add spacers between it and the Triangle. Your Triangles are well designed and safe to use with a surge protector. Blessings.

Expand full comment
Jun 30·edited Jul 1

Could You please further explain the magnets alignment? Does it even matter? Do the pairs need different pole alternation? You say the pairs are repelling, but You don't explain: a] which pole (north or south) is facing each other, and b] if those pairs are alternating (FOR EXAMPLE: Top row 1st pair N-N (facing), 2nd pair S-S, 3rd pair N-N // Bottom row 1st pair S-S, 2nd pair N-N, 3rd pair S-S?). THANK YOU SO MUCH for your help and for providing such awesome content!!! :)

Expand full comment
Jul 5·edited Jul 5

Found out, according to Tony Pantallaresco, it's not "Rocket science", so i guess it doesn't really matter, as long as the pairs of magnets are opposing (repelling). Tony neither didn't tell which pole to oppose (north or south), but he seems to be aligning all the magnets exactly the same way. So whether he uses N-N or S-S, all the opposing pairs are aligned with the same pole and don't alternate. I guess one could alternate those pairs and it wouldn't lessen the effect (maybe it would even improve the performance).

Expand full comment
Jun 21·edited Jun 22

Pretend I'm five and explain the magnet-flipping I see going on, if you would be so kind to this non-electrician/physicist/garage-mechanic/MacGyver.

1) I see you have stacked two magnets on top of each other, and taped them together. So you stack magnets that naturally attract -- not repel -- each other, correct? Because opposing charges attract each other? And does it matter which flat side you place against the duct tape?

2) I was unable to find for purchase the exact speaker wire and magnet size described, but I do have 14 gauge wire and 19mm x 4mm ceramic magnets. My understanding is the wire is the same inside different gauges, but the coating around the wire determines the different size. Is 14 gauge likely to give me poorer results (not quite as much wire running through the device)? And provided I use more magnets than your 30 x 4mm -- say, enough to cumulatively add to the same surface volume as 30 x 4mm-- will my resulting triangle be as effective, in your estimation?

Expand full comment
author
Jun 22Author

They are taped because the are trying to push away from each other, they are secured by tape, tape would not be needed otherwise. You can use in order I personally prefer: 12g - 14g - 16g.

Expand full comment

Thank you!

Expand full comment

Hi could you explain to me which magnets you mean are pair opposing, the top and bottom on each side? What is the effect of this and why 8 on one side and 6 on the other 2?

Expand full comment
author
May 9Author

All pairs are opposing each other, which is why I taped them together

Expand full comment

Do you have a video explaining what is happening to the bad stuff when you turn on the device - curious on the actual things happening the the synthetic biology.

Expand full comment

Would you kindly provide a list of materials in text?

Expand full comment
author
Apr 3Author

12AWG Speaker Wire (100 Foot)

40 Ceramic Magnets (30mm x 4mm)

1 Electrical Tape

1 Max Strength Duct Tape

1 Laptop Charger (100 watt to 200 watt)

4 Alligator Clips

Expand full comment

Thanks for the video! Each laptop has its own specific charger with a different connector type, voltage, and amperage rating. What are the specs that you used.

Any suggestions on where to buy ?

Expand full comment
author
Apr 4Author

I just try to use power supplies between 100 to 200 watt output

Expand full comment

What does the triangle cost if I order i order it from you?

Expand full comment
author
Sep 19Author

Please email me for further: FireMedic8@proton.me

Expand full comment

It's amazing Eric that you can use copper clad wire. That's a whole lot cheaper than the 100%copper I used before. Whew! TY for all you do. I got my board drilled last night. Blessings Brother !

Expand full comment

Why did you stay with 40 Magnets? Didn't Tony do his with 80?

Also, what are the specs on your template board you built and are using? Thanks for the video!

Expand full comment

this one is a smaller triangle the big one must be 80

Expand full comment

and perhaps instructions too? I'd like to ensure with 100% certainty that I did it right

Expand full comment

What can it do?

Expand full comment
author
Apr 3Author

SYNTHETIC BIOLOGY (Playlist)

https://www.bitchute.com/playlist/NjQh0sfKo7ez/

Expand full comment

Hi, I just bought 3 cutting boards to try make one of these. However your measurements ate not all equal, 17,17 and 20 why? Can I just make them all equal? What's the difference? Thanks

Expand full comment
author
Oct 10Author

It doesn't have to be, what ever you have to make it triangular will work.

Expand full comment