Its great watching everyone's scoping / videoing skills increasing and this is a prime example. That's the clearest shots I have seen of the pockets in what appear as ladder type fibers.
https://www.finishing.com/443/42.shtml some comments here may pertain, though this is about one a discussion on pumps not working in a pickling system....
------------------------
HCl does not crystallize. What you're likely seeing is metal salts. You'll likely have to reduce the metal concentration of your HCl. Get a metal analysis done and then look at solubility charts.
I’m new to your eye-opening reports … This might be totally unrelated to today’s assessment, but, after I watched one other video related to what is in your tap water, it occurred to me that I had once read the screen cover on a faucet head needs to be cleaned every so often as it can capture all kinds of gross residue. I know you’ve indicated these anomalies are also found in the air. For the water analysis, it might be interesting to see if there is any difference once the faucet screen is cleaned and maybe soaked in bleach overnight before reattaching. I did a water test on my tap water by putting it in a clear bowl and leaving overnight with a tight cover. It remained clear, didn’t see any film on top. I’m in South Florida.
I haven't observed HCL alone to do much, only when looking at onsite generated CLO2, once the part A&B stop reacting you have lots of sodium crystals, however you don't get a crystal kingdom
I have NO IDEA! I need a more verbal breakdown of what I'm seeing...what's normal and what's not!! Some of us need a microscope 101 breakdown for dummies. :D
Back in 2021 I was capturing loads of this crap in the reservoir of my dehumidifier. Yes 100% agree the air/atmosphere is the source, and many I feel are having their slide samples contaminated (or influenced) near immediately.
It would be very difficult to find an any environment that is not 'loaded'. I pondered this recently wondering if extreme cold regions have as much contamination, with all the flights going to Antarctica and all.
I have seen the exact same needle spikes growing in lidocaine. There is an example in this post.
I see the angel hair webs almost daily outside.
Nice work
https://www.bitchute.com/video/FzWOvouWxR1b
Hi!
Fantastic find! This is the first time that I see such well defined ladder structures.
Have you noticed how neat is the break of the chain-like part? Will they evolve into independent links?
Thank you for sharing your work!
Kind regards.
Hi Eric,
Its great watching everyone's scoping / videoing skills increasing and this is a prime example. That's the clearest shots I have seen of the pockets in what appear as ladder type fibers.
Cheers, Matt.
https://www.finishing.com/443/42.shtml some comments here may pertain, though this is about one a discussion on pumps not working in a pickling system....
------------------------
HCl does not crystallize. What you're likely seeing is metal salts. You'll likely have to reduce the metal concentration of your HCl. Get a metal analysis done and then look at solubility charts.
-------------------------------
also this https://www.physicsforums.com/threads/effect-of-hcl-on-nacl-crystallization-rate.1046298/
---------------------------------
sorry if these are way off guesses. I do wonder if this is about metals being present. I am so not a chemist.
I know nothing about metal concentrations in HCI. This is all new for me. I am learning as I go. Thank you!!
Is this something worth noting? Observation of HCI-induced nanostructures with a scanning probe microscope:
https://iopscience.iop.org/article/10.1088/1742-6596/58/1/074/pdf
I’m new to your eye-opening reports … This might be totally unrelated to today’s assessment, but, after I watched one other video related to what is in your tap water, it occurred to me that I had once read the screen cover on a faucet head needs to be cleaned every so often as it can capture all kinds of gross residue. I know you’ve indicated these anomalies are also found in the air. For the water analysis, it might be interesting to see if there is any difference once the faucet screen is cleaned and maybe soaked in bleach overnight before reattaching. I did a water test on my tap water by putting it in a clear bowl and leaving overnight with a tight cover. It remained clear, didn’t see any film on top. I’m in South Florida.
What about conductive polymers, with their zigzag atommic alignment pattern?
https://www.youtube.com/watch?v=UjMbwS0LOkU 😁
Hi!
Here are some links to memory polymers:
https://www.youtube.com/watch?v=7hwPVTFo2ww
https://www.youtube.com/watch?v=UjMbwS0LOkU
This one might be about Morgellons and finger attracted fibres:
https://www.youtube.com/watch?v=Q1gYMd54_QM
Greetings!
Thank you
Looks like gout crystal formation/inflammation, fascinating stuff. Thanks for your work FM8/Mellowkat. God Bless and take Care, indeed.
Give your DJ a raise!
Very interesting reaction! I presume the acid doesn't crystalize like that typically??
I haven't observed HCL alone to do much, only when looking at onsite generated CLO2, once the part A&B stop reacting you have lots of sodium crystals, however you don't get a crystal kingdom
I have NO IDEA! I need a more verbal breakdown of what I'm seeing...what's normal and what's not!! Some of us need a microscope 101 breakdown for dummies. :D
https://open.substack.com/pub/neomicroscopy/p/air-contamination-is-source-for-much?r=1yb1yj&utm_campaign=post&utm_medium=web
The Air is saturated with tech
Back in 2021 I was capturing loads of this crap in the reservoir of my dehumidifier. Yes 100% agree the air/atmosphere is the source, and many I feel are having their slide samples contaminated (or influenced) near immediately.
It would be very difficult to find an any environment that is not 'loaded'. I pondered this recently wondering if extreme cold regions have as much contamination, with all the flights going to Antarctica and all.
Personally I have observed crystal formations appearing very similar with Methylene Blue.